Most reacted posts

The current setup: I have 3x 340W panels each going through a Victron 100/30 MPPT and 25A breaker, then directly onto an AGM battery. Each MPPT is connected to a different AGM battery. The AGMs are in parallel and connected to thick wires which appear to travel to the other hull of the...

Thanks, would love to see a photo of your setup!

It sounds as though you have successfully managed to physically connect the USB/RS485 unit to your BMS though, I haven’t yet. Can anyone show images of it actually connecting to their BMS? For me, of the two options of cable shipping with the RS485 unit one plug is physically too big to fit...

Thanks for all the detail in here. With your Victron SCC did you set Bulk, Absorption and Float all at 27.6V (13.8V in my case, 3.45V per cell)?

I’ve ordered a JBD 200A 4S SP04S034. While I’m waiting for it to arrive I’m trying to order all the appropriate wiring and connectors. Can anyone confirm what size lugs I’ll need on the wires to the B- and C- pads? M6/M8/M10? I assume bolts are provided with the BMS to attach. I asked JBD...