diy solar

diy solar

Recent content by mufmur

  1. M

    Can I use JK B2A24S20P for 12V setup?

    I have 4 EVE LF280K cells and a JK B2A24S20P BMS lying around and wanted to use it for a small 12V system. Is this possible or do I need to get another BMS?
  2. M

    Connecting different DEYE models in parallel

    The existing inverter is a SUN-8K-SG05LP1-EU. Can it work in parallel with an additional SUN-8K-SG01LP1-EU or do both need to be SG05?
  3. M

    Axpert MAX II 8000 turns off

    Hi. How did you manage to solve this? I have an Axpert MAX II 11KW and having the exact same issue. The inverter shuts down after a few seconds and there's also no output on the AC
  4. M

    Need help with settings on my system

    I have 48pcs of EVE LF280K arranged in 3 sets of 16 with a JK B2A24S20P BMS on each set. The inverter is Voltronic Axpert 11KW. I want to put in the correct settings for proper functioning of the system and long battery life. Right now I have just configured the basic settings on the BMS and on...
  5. M

    Really confused about what the P- is for on JK BMS

    Yes, there are plenty of videos showing how to do the app settings for 16S
  6. M

    Really confused about what the P- is for on JK BMS

    The supplier sent me a manual but its not very clear, I will check that one and refer to it. Yes I'll be using it as a 16S. Okay got it, cell 16 on the diagram should be cell one
  7. M

    Really confused about what the P- is for on JK BMS

    So the fuse on the negative is not necessary? What about the sensing leads?
  8. M

    Really confused about what the P- is for on JK BMS

    Thanks for that analogy! So the P- would then be connected to the negative busbar?
  9. M

    Really confused about what the P- is for on JK BMS

    So the attached wiring diagram is wrong right?
  10. M

    Really confused about what the P- is for on JK BMS

    I've watched plenty of videos and read the manuals but I still don't have a clear understanding of where the P- is connected to. I have a JK B2A24S20P
  11. M

    Installing a wind turbine on my system to charge BYD LV Flex batteries

    My system has 3pcs of 5KWh BYD LV flex batteries connected to a Deye Sun-12K inverter. I want to add a wind turbine to the system but both MPPTs of the inverter are being used. Is it okay to connect the wind turbine controller directly to the battery busbar? Which wind turbine is recommended?
  12. M

    DEYE 12KW with deep sea controller

    I got in touch with DSE, still waiting for their response
  13. M

    DEYE 12KW with deep sea controller

    The issue is that the area gets power cuts almost daily and sometimes lasting up to 15 hours. So it doesn't make sense that the generator is running throughout. Yes in the Deye settings there is an option to select "GEN connected to grid input"
  14. M

    DEYE 12KW with deep sea controller

    Some pictures of the ATS and generator panel
Back
Top