Hello everyone. New to the scene but very excited to really work this thing out and finally be able to have a way to cool some food. Let me start off by telling you a bit about my situation. I purchased a moble home under forclosure a year and 1 month ago. It was bad. 18 pipe breaks and...
Ok this is very good information. I did not know it has capacitors. That is good to know the MPPT is not just regulating the voltage to only pass through battery voltage and discharging extra voltage. So i guess my question how much loss would i get if my pannel array was on a 48v string. Would...
Edmonton
Ya controller will only max out at 122voc and 11amp round up. So it would be well within its limit. I may be able to add a few more pannels and keep the voltage the same and ad a string or 2 but like mentioned I would be over the 15 amp fure rating and will need inline fuses or a...
The wire I am using for the battries is #6 welding wire rated at 600v @ 75amps. From the pannels will also be #6 welding wire since that is the max my charge controller can handle. None of the stuff I have in the photo other than the charge controller I need to use just provided it incase its...
Will this work with out fuses? Pannels are 20.4/24.3 4.91A/5.21A charge controller is 150/45 so it looks like ill have lots of room. Then i can wire my battery pack to 24v or 48v and get a 24/1200 or 48/1200 victron. My issue i dont fully understand is if i get a 24v or 48v inverter how do i...
Thanks for all the info i have some questions now. I am dumbfounded on some stuff and i may feel stupid after getting the answer but i really want to know.
Ok hear goes.
I hear alot about 12v 24v 48v 72v etc i get the basics of it. but when its about a battery grid i loose all sense of...
That is very good information. I absorbed it all at a 100% efficiency rating lmfao. All jokes aside the MPPT is still witch craft but I understand its function. So i guess my grid at the worst case scenario would be 121.6voc in the 4S2P configuration. Still way under the 150 rating of my MPPT...
Very good information and thank you for sharing. I will get everything mapped out on my roof tonight and have a drawing made up for everyone to critique. Been a bit difficult since everyday is like 32-34c. I hate the heat. Even in the house its like 32-33c. Been rough the past week. But ill get...
Does not really explain anything. My pannels fuse rating is 15amps so as long as i do not exceed this rating a fuse will not work. I will get a breaker for the pannels just so i have a safe way to shut them off. But from how it looks in the photo that inline fuses are not required for this...
Ok ill try to simplify it a bit. Hopefully there is no confusion in what I am assuming. Ill keep it really simple. Say I have 48v solar array in parallel say just 2 pannels @ 800 watts each. So 48v 1600 watts. On paper since is 48v its 4x the wattage. So 1600w x 4. Say i have a 3000 watt 24v...
I really appreciate all the knowledge. But for a minute lets go back to my first post and realize i am a 2 year old trying to figure out if the square fits in the circle. A lot of this stuff your saying is not in english. Its in Zulu. Simplify it that a 2 year old can understand. I just need a...