Any thoughts would be appreciated!
Shall i connect solar panels parallel or series
20 amp mppt renogy Charge controller
2-100 watt panels
1000 watt coleman sine wane inverter
12v 100 amp hr SLA battery
Only 12v , only using for a 8x8 shed 2 small led lights
Couple of battery chargers
The shed is about 2 blocks from actual residence to easy way to get power other than solar
unless you want the bluetooth option go with
Victron Bt or Renogy PG i have both they both and i just ordered another Renogy only because of the interface i prefer over victron . If you are only doing 200 watt in pv id start out with a pwm controller the cost for a mppt is 150 or more they have...
Yes both are the exact same
Also Renogy Rover PG mppt 20amp
Related power:100W
Open circuit voltage (Voc):21.6V
Max power voltage (Vpm):17.3V
Short circuit current (Isc):6.17A
Working current (Iop):5.78A
Temperate coefficient of Isc:(010+/- 0.01 ) %/℃
Temperate coefficient of Voc:- (0.38...
Can you advise
Current system is 100 amp Hour SLA battery
1000 watt coleman sine wave inverter
20 amp renogy mppt charge controller
2-100 watt renogy mono panels
i want to add more solar array & change to 24v system . Any advise would be greatly appreciated.
Thank you