diy solar

diy solar

Most reacted posts

  • Post in thread: 12V lighting

    Lights installed from my post above. As you can see; lots of light! The two of them combined only consume around 20 watts.
  • Post in thread: 12V lighting

    I use those switches as well. Here’s one on a battery box that controls a cooling system I put together.
  • Post in thread: Chins - To seal or not to seal.

    A picture is worth 50 words... Used 'Buy Again' From Amazon, both came from Chins-us.
  • Post in thread: 12V lighting

    I use these switches to control my 12v light and fan applications. The switches are fused, and you can pump a decent amount of juice through them. https://www.amazon.com/Nilight/dp/B08Y6QPZ1Z
  • Post in thread: Sigineer Power M3024NC - Communication Issues [RESOLVED]

    So I got my fix; I'm detailing this for the community as it may help someone down the road with a similar issue. I tried manually installing every driver included by Sigineer (listed in the graphic below). This basically consisted of overwriting the windows UART/COM driver with each driver in...
  • Post in thread: 12V lighting

    I put these in my greenhouse… Pretty bright! https://www.amazon.com/Nilight-1260lm-Driving-Lighting-Warranty/dp/B01KRV3PNA
  • Post in thread: Sigineer Power M3024NC - Communication Issues [RESOLVED]

    Hey All, I just purchased and installed a new 'Sigineer Power' AIO (M3024NC). Everything went smooth, and the system fired up as expected. I downloaded and installed the drivers and software supplied "SG-Solar-Power-Monitor", then connected the supplied USB-A to USB-B cable. Upon launching...
  • Post in thread: Chins - To seal or not to seal.

    Hey Everyone, Last week I received a new Chins 300ah (smart/12v). I did some basic testing and upon giving it a proper charge cycle; was happy with my new 319.94 AH battery. The build date on this unit (as reported by the Bluetooth BMS) was 5/27/2022. Happy with the product, I ordered a second...

diy solar

diy solar
Back
Top