I recently updated to a 48V system, all is working well with 8S+8S (24+24) BMS arragement in solar assistant, solar assistan does see the battery as a 48V battery.
However the small issue I have is that I have two battery packs listed in solar assistand of 24V BUT the main battery gauge still...
I want to add a LiFePo4 battery with BMS to this inverter, can anyone tell me if this Iconica inverter supports BMS communication, I can see that it has a USB and an RS232 port and I have solar assistant on the USB connection, the trouble is that the manual (attached) mentions nothing at all...
I have and Iconica 3KVA PLUS inverter fed with 3280kW of panels.
Does anyone have any comment about the lead acid battery configuration I have, the HANKOOK are new and the upper 4 batteries are older bay far, I don't seem to be getting the 6kW from them after a full charge.
Any advice would be...
I am seeing this PV power plateau effect at ~1.6kW. Though I had lost some panels but all is ok, I have 3280kW of panels. Is this plateau a solar assistant setting?