Most reacted posts

I also asked Seplos what this parameter is, answer from them: "No need to change this" (y):LOL:

Please let us know if you make it work!

Wrong! If they offer a communication with a few brands then I assume that they know how the different Inverter are acting - at Victron for example they don´t know it, they don´t even understand it. (At victron: when there is a Canbus BMS then it´s the master because it´s the boss, it´s fitted to...

Yes it is, in a german forum i have seen that with SMA there are also a lot of problems. The thing is: The hardware is good and but the software is a fail. They only added a correct BUS-protocol adapted to different inverters, but that doesn´t mean that the "Signals and Infos" are sensible and...

Ask Seplos if there is a RS485-Version available. I had a question about the BUS-Connection and they asked me what version i have: Canbus or RS485...

Hi guy´s, I havent´been here for a while - now a questions (Seplos BMS first Generation (1101-SP16) with SW-Version 2.7): When there is no full-charge a few days my SOC jumps from 90 to 100% on the next sunny day with full charge. In other words: My SOC is sinking about 3% every day without a...

Has anyone the same problems like I have it described it here on the last post at the bottom? https://community.victronenergy.com/questions/70005/seplos-48v-100ah-energy-storage-battery-compatibil.html

I don't want to be a spoilsport, but I´m sure the BMS does this not, not the Seplos. More and more users who are writing with the technicians from Seplos and testing the BMS in all it´s functions come to the same conclusion: They don´t know how to charge a lithium-battery and the software and...

Does someone has an answer for my question? Does the Victrons DVCC-Settings (Voltage- and Currentsettings/reduction) work with the Seplos-BMS?

Write an email to Seplos, they reply very quickly

I´m now really happy with my board, price-performance/function ratio is excellent on this board but i also had A LOT of questions and have 2 Whatsapp-Groups with technicians from Seplos ? I will write them a summary with improvements in the manuals when i have time for that. There are still 2...

I´ve tested it now and have written a lot with a technician from Seplos: The hardware and the functions are good and working for a really good price, but the software is bad. Seplos is doing wrong thinks with the parameters and what they are doing with the CVL respectively how they interpret it...

But there are (were?) boards with RS485 communication to inverter because i got screenshots from an (older?) manual on whatsapp on where you could see the same pin-connection like it has the canbus and the series-number of my board has the ending "-10C", C stands for canbus.

Hello! Sorry for my question between your discussion: I have a Victron 3-phase System (Multiplus2, MPPT, Cerbo-GX) and a DIY 48V battery (Lifepo4 280Ah). Now i hestitate between the two options: - i keep my "independent" JBD-BMS and complete it with a Victron battery-monitor (for an realistic...