Recent content by rbowman1953

I was talking with tech support at Signature Solar about my issues with the EG6500EX inverter and wanted to use the input/output readings from the display for referral to tier 2. He told me that they could not accept the readings from the display for this purpose. Are the readings on the...

I disconnected the batteries and did a continuity test on the terminals in the inverter and it has continuity

I disconnected the batteries and did a continuity test on the terminals in the inverter and it has continuity

No. I have mine set t solar only and have had lots of sun

Not sure I have a ticket in with support

Ok the one inverter doesn't show any voltage from the batteries 2p1 the left pic 2p2 right pic

I have one battery in the rack that is not charging. It stays at 8.9 volts. Should I try to disconnect it to see if it will cycle back to the batteries.

Thanks I'll try that when I get home

I also ran a BMS Test on the batteries and it seems my battery 6 is not charging. I sent sug solar a copy of the test

I reflashed the firmware and reconnected the batteries still in battery bypass using the grid

The version I flashed is u2= 61.13 u1 = 79.70

What is the newest version of the firmware

Removed the com cable but no change

I originally had Option 5 set to EG4 on 2P1 and User on 2P2 when I got the warning and the system starting to run from the grid only. Signature solar tech support had me set it to User on both.

Both are set to user advised by signature solar