Hi,
I am buidling 2x200ah batteries with Seplos BMS and will be connecting them to 5kW Hybrid inverter. The inverter can max charge/discharge at 62A. I already have Schneider DC breaker connected as it was used with Pylon batteries and intend to leave it there. The wires are 16mm2(6AWG). Since...
Hi all,
I have Seplos v2 with fw29 that I have been using for almost 2 years.
Recently changed the inverter to Deye and wanted to connect Seplos 2 it but cannot seem to make it work when the battery is set to Lithium.
Once CAN cable is connected Seplos would run for 5 secs start discharging and...
Hi,
I'm looking to setup Q(U) mode on Deye inverter.
I got access to Grid settings but I do not see Q(U), there's P(Q), P(F) etc but not Q(U). As I understand in this mode the reactive output power changes based on grid voltage.
Has anyone made these changes?
Thank you
I have 5 year old MPP solar MPI 4KW inverter I was wondering if anyone has firmware for it.
The inverter does work fine with currne tone but it was not upgraded and I see bunch of features missing.
Thanks