Found these links and files a few days ago when I was having issues connecting via RS485 to my EPEVER TracerAN 3210. I tried everything I knew and researched every thing I could find. Switched computers, comm ports etc but never connected. I am not new to interfacing via RS485m to industrial...
Want to be able to run AC for a few hours when boon-docking in hot climate. Not much need for AC in Alaska. Also do not want to have to run gas generator very often. Want to recharge 6 ebikes after a days run without gen. Many dry camp grounds do not allow gen at night. Do not want to stress...
I did finally program the Tracer solar controller during the trip via the MT50 display. Need to do more research on the solar controller settings. When the programming was complete I did notice the solar input into the cells was higher. The same thing happened when I switched my 120v converter...
After letting this unpack for a spell I believe I need to measure and record the charge and absorption voltages absorption of the multiple power sources I can not adjust. For now that is the power convertor and the truck alternator. I can then make a more knowledgeable decision on which voltage...
Request opinions or general guidance or pointing to article/posts for interactions of the charging source voltages, load, and batteries.
Have read many articles on the forum and elsewhere. Each seems to deal with a few of the charging sources and batteries but not as system all together with...
Thought I would share a few photos of my truck camper transfer switch. I started with a GoPower TS-30 transfer switch but upgraded it. Not a fan of loose wire connections inside the box as OEM, added a terminal strip. Also added circuits and fusing to keep the converter (battery charger) and...
Thanks. This reinforces what I thought. I am looking for more technical detail on voltages deltas, experiences and voltage source priorities.
One good tip I did not think of was a easy and quick way to switch on/off a voltage source, like the truck alternator if needed.
I may consider adding...