salaxi54's latest activity

If you connected battery positive to the BMS, this is why things blew up. That gives you basically a direct short circuit. BMS goes...

From the extent of the damage it looks that the BMS was connected across the cell pack. Replace the BMS and balance leads. The BMS is...

Yup, i guess that's it! Said i was a newb, my fault... Will wait on a new identical BMS now, lesson learnt. By the way, as promised, a...

Ok, so BMS it is i guess.. Is there some sorta guide for properly connecting the BMS, and setting its' parameters up? Only recently...

That "top cover" was just a temporary means of protection while moving the battery around.

I thought so too, but wanted to make sure before having to do a new purchase... Nevertheless, here's a screenshot of the inverters'...

I didn't wire the BMS myself, but the guy who sold me the battery did. I've only a rather missleading pic of it at the moment: That...

You can see that some of the MOSFETs were burnt, and i thought it was only the 2 on the one side of the pcb. But after disassembling the...

Alrighty, so i set up a rather small system, which consists of 3x340W panels, an Easun SPH-3K (3.2Kw) inverter, a JK-B2A8S20P-H BMS, and...

Thanks for your welcome y'all !

Hi there fellow solar-power fans, writing from Nafplion, Greece. I've so many questions to ask, but thought it was appropriate to say hi...