This is how I tricked it
Note the adapter from DALY BMS USB ... it goes NO WHERE but is enough to trick Solar Assistant to display it.
Now i did link /dev/USB1 to /dev/ttyAMA0 and this way I am using direct serial to my Daly BMS.
No fancy adapters and stupid stuff like that. Never stuck. You...
I have Daly BMS 16S 48V 200A. I stil think that there is no CAN/RS-485. When i do measurement of CAN/RS-485 pins i have 0 voltage. Is this normal ? Do i miss the parts for CAN/RS-485 ? If so then my UART is working. Can i do UART to RS-485 converter and connect to my Inverter so Daly and Growatt...
Hi, i got Daly BMS 16S 48V 200A. I have connector for CAN/RS-485 but it is not labeled and when i do measurements there are 0 voltage on any pins. Does this mean there is no support for CAN/485 ? I also have UART label port and cable which works. I am able to read data. Do you think that it is...
Can you do a measurement of CAN/485 port at Daly side and tell me if you have any voltage anywhere ?
I have the connector but it is not labeled and have zero voltage all can/485 pins. Maybe there are no elements inside ?
UART is working so i think for someway UART to RS-485 if possible ?!
Can anyone help in connecting Solar Assistant with Daly BMS ?
Currently I am using 3 cables directly from Daly BMS rx/tx/gnd to my PI4 device connected to
pins 6,8,10. I am able to read data normally with applications like
/usr/local/bin/daly-bms-cli --device /dev/ttyAMA0 --all
So everything...
I have the same problem. Staying mostly at 75%. This means that inverter does not charge with solar and i a missing 25% from the battery each day. I understand that i must connect BMS to inverter. My BMS is Daly 16S 48V 200A and my inverter is Growatt SPF 5000 ES. Anyone knows where i can get...
Hello,
My current BMS is 16S 48Volt 200A. Software version: 31_220808_100B, BMS HD Version: BMS-GD230-309E.
Which firmware you suggest to upgrade to ? Also my bluetooth device is not discoverable so i give 3.3 volt from first cell to the green wire and it works now. The interesting thing is that...
I hit the same stone. My BT also does not work correctly and i need to supply external voltage for it to work.
My UART is working. Any ideas if it is possible UART to RS-485 and feed my inverter with data ?