I'm facing a decision and would appreciate some guidance once again. For the past 2 years, I've operated a 24V system powered by 6 LiPo batteries. Recently, particularly during evening hours, we've observed that my bulbs begin to dim and then briefly brighten, leading to a persistent dimming...
Listen I appreciate all your comments and we are going in a circle, no one has really given me an answer to what I am asking and I believe the more info I give we are still not going any where.
I have a 2/0 cable the cable takes up to 400 amps - I think my 250 amp fuse should do what its...
I am looking to replace my mttp and inverter to this all in one system. My current mttp gets my solar cables in and has wires going out to charge the batteries. This all in one does not have that option it has just a PV input
Anyone has this unit and can share insight.
This is how I have my current system - moving to a 48v system hence upgrading to a all in one unit - this might be more trouble if I don’t wire it properly- I watched a video by Will and he did exactly what I drew on A .
Sorry my bad - I moved from 4 12 V li batteries @100amp each to 24V 200amp (series/parallel) system. YEs new 24V inverter added.
My batteries and inverter are close by the longest 2/0 wire I use is 5 ft in length max. Using a 2/0 cable for batteries and inverter 2ft each . Updating this as the...
So that I understand correctly the battery cables connected to the inverter charge the batteries and pull the juice from the batteries- will this stop working when it charges as I’m off the grid no shore power.
Good Morning all - I have been using a 24 volt (4X 12 v 100ah Li batteries) for a few years now and have had a 250 amp fuse between the inverter and battery bank. I have bought another set of batteries ( 6 in total now) and looking for 350-400 amp fuses ...and no luck. I was wondering if there...
Yes it is - so does that mean that i don't have to change the fuse - I thought the fuse was based on the battery amp. A 2/0 under 50 ft will take up to 450 Amps - but my fuse is 250Amp - i assumed that the amp of the battery bank determined the fuse size - if that is not the case am I good to...