I have a small system with 3 arrays of 3 340W panels each. Each array is handled by an epever mppt controller.
I was check on my SOC and I noticed I was lower than I expected. A quick check of the displays showed that array 3 was not supplying any charge. I have an inline fuse on each...
I recently assembled a 8s 280AH bank using batteries from Docan (thanks Jenny!). It came up easily and after manually top balancing the cells I ran a 250AH discharge cycle, all went swimmingly. After recharging the bank, I started having problems with the bluetooth connection. The blue light...
I am a newb although I do presently have a system working (2KW with AGM batteries). I want to add some prebuilt LifePO4 to my 24V system. I am having a hard time deciding between two 12v 200AH batteries or two 24V 100 AH. The 12V batteries would provide more "flexibility" in that it could...
This might seem like dumb question but here goes. I'm interested in having an A/C powered charging system for my lifepo4 bank. Getting these in substantial amperage is expensive.
Now - my battery bank is charged from 3 separate Epever trace charge controllers utilizing 3 separate panel...