SunBandit's latest activity

Only a few days in and all is going well with one rather noticeable exception. This thing is not nearly as quiet as I was expecting...

For the sake of completeness, I am updating this thread to let others know, I now have my battery and everything looks great. Some...

I am seeing it as a potential race condition. It would appear the EG4 14.3kWh indoor battery is designed with high quality safety...

OK. So here are the tradeoffs as I see it, vs a fully compliant hybrid that can blend: - you will need extra batteries to absorb surge...

6000XP won't back feed to the grid if that is what you mean. Will only use grid if battery is low SOC and solar not sufficient. Assuming...

Just noticed the Los Angeles location. You want to be careful with AHJ finding out you have non-compliant ESS. Non-compliance with...

Your screenshot indicated 100W of available solar at that time. Or 100W of solar draw. Unclear what it represents in this specific UI...

OK. Managed to confirm the functioning of the panels which is what I really wanted to do as I only have limited time with the scissor...

Can someone answer this question: If the solar circuit is being used, does the inverter need to take all of the current and put it...

Yes. You can see in first post in this thread the load was 435w. Separately, I found a different page of settings. One of them is...

I am not looking for it to blend. I am looking for it to use the solar. I don't have 100w of solar. I have 12 490w panels in two...

Did some further testing. Wanted to get the load above one of the strings potential output to see if it would kick in. The good news...

Bumping this. I am waiting for my EG4 280Ah battery to travel the seas so have my panels and inverter up and running along with grid...

I think i have the setbacks right. The top of the image is cropped a bit. I am trying to avoid micro inverters by optimizing placement...

The picture is hopefully somewhat self-explanatory. 12 Silfab 500watt panels. Trying to achieve minimal shading. Two strings going into...

I’ll second that. I have the 6, wish I got the 10, circuit transfer switch. I could put the furnace on Line in the summer and flip on...

The 6kxp can not backfeed to the grid. (It's an off grid AIO)

I am considering a similar set up also in the the LADWP area. I've been considering an EG4 6000XP, an EG4 PowerPro and 10-12 450-500w...