Most reacted posts

Hi all. I hope someone has found a way to fix this problem. I have an ebox-wifi-01 module and it was working great in AP mode but then I found the web interface and I found a mode button to switch to Station mode and after that the device is not connected to my home network nor my phone. I...

Thanks for the reply. Would you then say the two pins that says load relay are a positive and negative output or are they a switch that either is closed or open depending on the battery voltage? And I assume in this case that "1" means off and "on" means on

I bricked my blue box trying to connect it to my network. Bought the black one and it is connected to the cloud working fine. To scared to tinker with it further

Good day, Florth, I am also an owner of a Tracer charge controller but only the 50amp and I also can't find any clear explanation as to how to wire the accessories. I see this is an old post and would like to know if you were able to find any more details? I want to use the load relay but...

I have the Epsolar Tracer 5415AN 50A MPPT 150V Charge Controller - 12/24/36/48V-50A

Good day, I hope I am in the correct section. I am building a WISP tower and need some assistance with the wiring of the load relay. Just for background we are using 2 x 410w pv panels wired in series that gives close to 100v at max so that is why we selected the charge controller that has a...