Most reacted posts

Thank you, Rocketman- that was my concern- I thought the shunt would interfere with cable to busbar, affecting the total length. So what you are saying, is on the negative cable, the shunt has no affect, as long as each battery cable to the shunt plus the positive cable add up to the same length.

Thanks, Rocketman- can I install one battery monitor on 2 12v 100ah lifepo4 batteries in parallel? I am also wondering how to keep the wires the same length when installing a battery monitor with shunt. Thanks. Talque.

I am swapping 2- 6 volt, 230ah, deep cycle lead acid for 2- 12 volt lifepo4 100ah in parallel. It is becoming a bit more complicated than a direct swap. Is there a simple way to monitor the lifepo4 batteries? I am fusing each solar-powered panel to 30a mppt charge controller, charge controller...

Thanks- what I had originally planned were cables from each battery positive (fused at each battery) to a busbar, where all other connections would be made (trailer fuse panel, solar charge controller, possibly inverter) now that I am including battery monitor on negative side, would I make the...