https://www.alibaba.com/product-detail/High-quality-12V120AH-Xuba-Lithium-battery_1600143862721.html?spm=a2700.icbuShop.41413.23.da2341b4ff23wO
This looks like a good deal as well XUBA. A lot of people here are familiar with XUBA. I think I am going to go with this over SOK b/c it's cheaper...
I kind of want to use the mc4 1-4 branch connectors because the wires are longer and it will allow me to configure the panels a little bit better. If I do that I will get 20amps? Will my setup be ok?
Hi, I want to add two 100w panels to my existing two 100w panels so total four 100w panels together. The wires are prob a good 40 feet to the 40a cc (can charge li). (currently I am using a 20a cc but I have the 40a cc) two 100ah li battery, and 1,000 w pure sine inverter. I just have a few...
is this any good? It's the best bang for your buck
Lynx Lithium 12V 120Ah Lithium Iron Phosphate (LiFePO4) Prismatic Cells Battery, 4,000+ Cycles, Daly BMS with Cold Temp Cut Off and Bluetooth Compatible
I'm looking for a LiFePO4 battery. I don't think I can build my own that's why I really liked the SOK battery but if there's something else that's better or similar and more reputable please share. I can't afford two battle born batteries and that SOK is half the price. Then this Lynx battery...
I actually don't have the li battery yet. But I do have the 40a cc mppt li. I have the two additional 100w panels. Total is 400w. I have 10 awg wire. I want to keep the 10 awg wire. I'm hoping there will be a black Friday sale for the li battery.
I actually just bought the 40a rover li and just read in this forum about people's complaints. I hope I didn't make a mistake by buying it. Please somebody tell me it will be ?
i don't want to go up to the roof and take a picture of the renogy panels but they are 100w Monocrystalline panels. I guess you are trying to tell me that the 2s2p will be the better options than using the mc4 1-4.
Right now I have two 100w panels connected with y branch connectors and sometimes I'll get 10-11 amps. So if I series the four 100w panels I'll still get 10amps?
so I wanted to buy two Renogy 100ah li batteries for about 1,500 + tax but then I saw this on ebay
12V Lithium Battery 206Ah Lithium Iron Phosphate (LiFePO4) Prismatic Cells by Lynx Battery with Daly BMS, Low Temp Cut Off and Bluetooth Compatible for $1,050. which one should I get?
Now I want to get the SOK 200ah battery. So I know with two 100ah batteries that I would have to parallel them for 12v but if I get the SOK 200ah battery do I need to buy another one and parallel them for 12v? Or just one SOK 200ah battery is fine? My set up is four 100w panels, 40a charge...