ThatCoolNerd's latest activity
-
TThatCoolNerd reacted to Mattb4's post in the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic. with
Unsure.
A few errors. 1- 100 w panel does not output 20a. It is closer to 5-6a. You do not need 8awg wire even if you add another panel. 2 -100w... -
TThatCoolNerd replied to the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic..100w/12v * 1.2 = 10a 2 of them = 20a I know in realistic conditions panels will not pull their maximum rate the majority of the time...
-
TThatCoolNerd reacted to sunshine_eggo's post in the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic. with
Like.
You do not need overcurrent protection (OCP, a breaker or fuse) between panel and MPPT - only when you have more than two strings in... -
TThatCoolNerd reacted to Rednecktek's post in the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic. with Like.
Skip the EPEver, they have a known issue with not tracking the PV voltage. Go with HQST, Rich Solar, or even PowMr for a decent MPPT...
-
TThatCoolNerd replied to the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic..1.25x wire rating, not max load? Just making sure. I'm assuming I'll need an appropriately upsized cable (0 AWG) as well to accommodate...
-
TThatCoolNerd replied to the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic..Noted, thank you
-
TThatCoolNerd reacted to DIYrich's post in the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic. with Like.
Shunt between battery and busbar. I recommend a switch (breaker ok) between battery and pos busbar.
-
TThatCoolNerd posted the thread I am a beginner who is wanting to build their first solar setup. I would like some feedback after drawing a schematic. in Beginners Corner and Safety Check.I am planning on building a small (~1.2kwh) mobile system that can be hauled around the home and yard for various AC applications. I do...
-
-
TGood job, the first step is admitting you have a problem. :ROFLMAO: Seriously though, wow... great stuff..... can't wait to see more!
