upsideup

It has been pretty good so far. Happy to have those above issues fixed. I think the value is decent --- It would be nice to have a...

The software update that was provided to me Friday fixed the above 2 issues. I was glad to know that the issue was with the inverter's...

Just 1 for now. I plan to add a 2nd in the future.

If it helps, I assure you the 14kWh EG4 Indoor battery perfectly interfaces with this inverter. I would guess the Outdoor would as well.

Also the user manual has been updated here: https://us.growatt.com/upload/file/SPH_10000TL-HU-US_User_Manual_EN_202406.pdf

Growatt says they are going to send me a software update to test on the inverter. I'll report the results.

I have not yet. The datasheet lists self-consumption at <60w which is not very specific, ha.

I am just using the included CTs (it comes with 2). The manual in some places calls these "meters" so there might be a little...

Once you get past the serial number issues I had earlier and you have the device and datalogger added to your account then go to...

Attached is a photo of the web browser config tool, which shows the allowed settings are 36-100%. I have the BMS set to allow discharge...

You have it right as I remember it. Took that photo a few days ago. 1. Yes, The internal sensors are showing what is going to home...

Yes and the CTs do, I just think Growatt is using this Internal Current sensor reading from L1-p and L2-p for the "export" calculation...

Looking at the attached image from the manual L1-p and L2-p seem to be internal current sensor power. But maybe the reason it is showing...

Also wanted to add this "Operating Modes Introduction" they sent me, which adds clarity to a few things the main manual is not very...

The date and time were all zeros for the first day or so, then it randomly, on its own, updated to 1990. I was able to get it to get the...

Yes, to an extent. You can use the Time Of Use function and set when and to what level to discharge the battery to. There is a lower...

Yes this is what I suspect....obviously not my phone haha

Correct. Doesn't accept serial number at that point. Also, no Wifi networks are visible so even if it did not sure it would work...

Yeah the manual says to choose direct wifi/Bluetooth, so I do that then select device.

Yes, two things appear wrong. 1. In the Shinetools app when selecting my device it asks for serial number but it will not accept the...