My brand new SMX 3.6kW had a hardware fatal error. The small motherboard that is connected to the PV, is also connected parallel with + and - to the main motherboard. But that is not all. On the right upper corner there is another transversal stick, that also transmits "something". I have had a...
To explain a little further! I bought last year on the beginning of the year the EAsun Isolar-SMX-II 3.6kW model, because I did install another 4 230W 24V panels. Together I have had now 8 panels 230W 24V panels, connected in series (270V together) to inverter. I have had another 4 100Ah 12V...
So yeah I tried the Utility, and it stays on Bypass, but it won't charge to the full but batteries will stay somewhere where it recovers.
THere was no change when I set the low voltage alarm 0.2 or 0.4 higher. It sets the mode into Inverter at 23V. I also tried to set the alarm and transfer to...
Will continue this thread as it seems to be the closest what I experience.
I am having a ISolar-SMX-II-2.6KW Inverter from EASUN - the yellow one. I have been plugging it to a 2p2s 100Ah 24V Exide Sealed acid batteries connection. I am now using only two of the batteries so 100Ah 24V.
The...