Most reacted posts
-
Post in thread: Additional hardware for parallel configuration
So the shaded string will be my big diode, basically (: Thank you!- Reaction score: 1
-
Post in thread: SOK 48V 100Ah PRO reports too high battery max. discharging current
This number is what inverter interprets BMS data, it's reported by inverter. I did not sniff 485 to check real packets sent by BMS My assumption is: if charging current is reported by inverter in straight 1A value format -- the discharge is the same But I could be wrong and your 16bit difference...- Reaction score: 0
-
Post in thread: Additional hardware for parallel configuration
Hello! I have 9 panels on my roof that fit my inverter perfectly I went ahed and purchased 9 identical panels for a very good price and I'm thinking about installing them under the existing ones in 9s2p configuration (I mean, two 9s strings connected to the same mppt tracker in parallel) But my...- Reaction score: 0
-
Post in thread: SOK 48V 100Ah PRO reports too high battery max. discharging current
I have SOK 48V 100Ah battery connected to MPPSolar inverter by RS485 (with Pylontech selected as protocol) It's set up to bypass (to grid) if the battery can't provide enough power, but in my tests BMS turns off by OCP and then the inverter faults with too low bus voltage. Bypass never happens...- Reaction score: 0