Most reacted posts
-
Post in thread: Is the Verbay BMS any good?
VERBAY 8S 24V 200A Lifepo4 Battery Board UPS Energy Inverter BMS PCB Board with Balance it’s selling on Amazon, but not sure if it’s okay to post links.- Reaction score: 0
-
Post in thread: Is the Verbay BMS any good?
This is a BMS for a UPS. Is this not appropriate for a solar battery. I would order 2 of these for a 8s2p 24 volt 400ah lifep0 battery bank.- Reaction score: 0
-
Post in thread: Connecting a battery monitor shunt to Daly BMS
Newbie Question: I have an AiLi battery monitor shunt. I also have a Daly 250 amp 24 volt BMS. The main negative of my battery is connected to the B- of the shunt. Does the P- of the shunt connect to the B- of the Daly, or does the P- of the shunt connect to the P- of the Daly? Whichever is not...- Reaction score: 0
-
Post in thread: Daly 24 volt 8S harness with ring terminals
Does anyone know where i can get a 8S harness with ring terminals pre installed? I don’t really want to do it myself. I thought that Will may have offered it for sale, but I can’t find it. I have 16 200+ ah lifep0 cells i want to make into a 8s2p 24 volt battery system. so I need 2 8s...- Reaction score: 0
-
Post in thread: Starting my portable Growatt solar generator build.
How are you making this portable? Are you installing it on a dolly or creating a portable case for it?- Reaction score: 0
-
Post in thread: Lost threaded terminal screw of Caleb 200ah
Here’s my 16 cell, 400 amp hour 24 volt Calb pack. While discharging, I noticed one of the cells voltage was low. When I touched the terminal, it was burning hot! i discovered that the screw in the negative terminal had lost its threaded insert! The screw was just sitting in there loose...- Reaction score: 0
-
-
Post in thread: Daly 24 volt 8S harness with ring terminals
I used a crimper and ring terminals.- Reaction score: 0