I have a Renogy Rover 40 amp controller.
I found info saying that because there's no float for a lithium battery it's best to set the Float and the Absorption/(Boost?) both at 13.4 volts.
The controller has an Equalisation Voltage and the manual recommends no voltage and it can't be switched...
I have a battery monitor which came attached to my 300aH LiFePO4
As of yesterday 8888s appeared
The battery also has an isolation switch attached and when turned of the monitor still stays on with this error code.
Any ideas?
I have an opportunity to select either a 2,000 watt or 3,000 watt pure sine 12 volt inverter as a prize in a competition.
I intend to connect it to a 300Ah LiFePO4 which will have 600 watts of solar panels.
It will be used infrequently.
On occasions for a 240 volt 340 watt washing machine.
An...
Hi, I stumbled across this DIY forum and at last I may be able to sort out a few solar questions in the future. I live in Southern Tasmania.
I have 6 mismatched solar panels totalling about 420 watts which I know shouldn't be done but it works for the moment. I get about 20 amps when the sun...