Most reacted posts

Hi all :) I have been reading this great forum for some time, so I finally decided to go with my own build. I have a 4s 100 AH setup, with prismatic cells. I decided to go the DALY way, since I read that they supply a temp sensor with their BMS. I ordered a 100 A and I never found a proof that...

A week ago, I visited my local Hymer dealer and we started a chat about LFP batteries. He showed me the new Hymer hybrid battery system: Smart system Hymer video seems a major European RV brand, has managed to find a way to use both lead and LI chemistries together as per the above video. So...

Hi, I would appreciate if you can help me a bit. I read the post, but did not understand why the charge mos keeps going off. I have set the high voltage protect to 3.33. The battery discharges. The charge goes on only during discharging. If I set the high voltage protect to say 3.45, the charge...

A small update. I wrote to Dali Aliexpress store and below are the answers. Apparently, if you set the sleep waiting time to 15300s, sleep is disabled on the 100A 12v model.

I have a Votronic shunt. The reading on the shunt correspond to the readings on the app.

I have been planning my batt box for a while and the heating is my primary concern. I had an idea tomuse heater for car seats similar to those...

Thanks a lot! I set up high and low protect. Only, I can not setup fore sone reason the cell reference volt ( stays on 3.6) and the sleep waiting time ( stays on 3600s). The BMS is just unresponsive to these two inputs. Any ideas?

Hi, I just finished with my battery bank, but I struggle to program my Mean Well ENC-360-12 to correctly work with a two stage charging. I would appreciate any help. I have the SBP-001 programmer and I connect correctly to the device. Thanks!