Hey, welcome back and thanks for the reply.
I believe I found the cause behind my battery emptying during late night hours. I discovered a semi-short circuit due to a faulty temperature sensor installed on a water pipe. I was able to verify that the sensor was the reason for current leakage...
well I have a loss factor of 15%, this means the inverter will receive around 448 V max. It is really worth it- specially in the winter, mainly because I have too much shadowing- my voltage drops so much during winter days.
In Summer, I also have shadowing but at a less amount than in winter...
Hello, I have the SOROTEC LiFePO4 battery, 48V 100 Ah, and attached is the datasheet. I installed it along with a SOROTEC REVO II 5.5 KW inverter since August 2021. Few weeks ago I got these two fault codes:
Fault Code: 80280000
Warning Code: 80000200
these are still displayed now in the...
Hello, I have the SOROTEC LiFePO4 battery, 48V 100 Ah, and attached is the datasheet. I installed it along with a SOROTEC REVO II 5.5 KW inverter since August 2021. Few weeks ago I got these two fault codes:
Fault Code: 80280000
Warning Code: 80000200
these are still displayed now in the...
Hello, I have the SOROTEC Lithium LiFePO4 battery, 48V 100 Ah, and attached is the datasheet. I installed it along with a SOROTEC REVO II 5.5 KW inverter since August 2021. Few weeks ago I got these two fault codes:
Fault Code: 80280000
Warning Code: 80000200
.....these are still displayed now...
Hello, yes I have a SOROTEC LiFePO4 48v 100Ah battery and I have experienced sudden discharge overnight, at a time I had as little as 150W per hour consumption in average. Maybe because of the Grid tie? can you explain how to solve this please?
Hello,
Has anyone tested the maximum PV array voltage that the SOROTEC REVO II can endure?
I have a setup of 12 panels (Trinasolar) 545W, with 37.7 max open circuit voltage.
My loss coefficient is around 15%.
The DC voltage on the PV array is around 380 Volts max.
My question is: can I add an...
Hello Ronny China, please share with us your experience about the SOROTEC REVO II here so that everyone can benefit- check above some questions about such inverter and let us know your feedback !
Hello, I have the SOROTEC LiFePO4 battery, 48V 100 Ah, and attached is the datasheet. I installed it along with a SOROTEC REVO II 5.5 KW inverter since August 2021. Few weeks ago I got these two fault codes:
Fault Code: 80280000
Warning Code: 80000200
these are still displayed now in the...
Hey Mike, thanks a lot for the info.
I would be very interested to obtain the software for battery voltage and amps calibration, as I have two batteries connected in parallel (LiFePO4 Sorotech 100A 48V each). I had trouble in calibrating them and I still feel they are not alligned.
Would...