I have a Deye sun-8k-sg01lp1-eu.
The problem is that it sends to the grid even though the option Solar Sell is disabled and System Work mode is set to "Zero Export to CT".
This behavior is observed only when the battery is at 100%. If the battery is under 100% is it not sending to grid.
These are the settings I have
and this is the Flow chart
What might be the problem here?
The problem is that it sends to the grid even though the option Solar Sell is disabled and System Work mode is set to "Zero Export to CT".
This behavior is observed only when the battery is at 100%. If the battery is under 100% is it not sending to grid.
These are the settings I have
and this is the Flow chart
What might be the problem here?