BronteJane
New Member
I know this topic has been discussed on other threads but I am still struggling to find specifics. I am setting up an entirely off-grid system with the exact same architecture as the system map below. My question is where do I create the Neutral - Ground bond in the system? Based on my research, it seems like it should be located at the load center (breaker box). If yes, do I simply run a grounding rod from that ground point? Also what grounding setting should I set the EG4 to once that is established (ie setting option, #26)? Thanks for any help, much appreciated.
![Screenshot 2024-07-14 at 1.36.33 PM.png Screenshot 2024-07-14 at 1.36.33 PM.png](https://diysolarforum.com/data/attachments/228/228660-5112dc8901d76093a86d1c2c45019b27.jpg)
![Screenshot 2024-07-14 at 1.36.33 PM.png Screenshot 2024-07-14 at 1.36.33 PM.png](https://diysolarforum.com/data/attachments/228/228660-5112dc8901d76093a86d1c2c45019b27.jpg)