Pip 5048gk mppsolar inverter
2 x 10 panels in series than paralel to the inverter
panels are 250w 8.5 amps
Open circuit they all measure around 33v
if i measure 1 string (10 panels in series) on the roof i get around 320v, which is good
The i go measure at the breaker before going to the inverter , i get like 220v
I hit the breaker which disconnects the panels from the inverter, measure again and i get 320v
is this normal or am i having a big voltage drop???
Wires coming from the panels to inverter is
8awg
thnx in advance
2 x 10 panels in series than paralel to the inverter
panels are 250w 8.5 amps
Open circuit they all measure around 33v
if i measure 1 string (10 panels in series) on the roof i get around 320v, which is good
The i go measure at the breaker before going to the inverter , i get like 220v
I hit the breaker which disconnects the panels from the inverter, measure again and i get 320v
is this normal or am i having a big voltage drop???
Wires coming from the panels to inverter is
8awg
thnx in advance