d3zgg3q45d1
New Member
Hello, i have a SUN-10K-SG04LP3 and two CFE-5100 batteries in paralell.
I know its not an approved brand from deye.
Work mode: Zero export to CT
Energy pattern: Battery charge first
Batteries are connected to the inverter BMS port via provided ethernet cable.
During the day the batteries were charging and discharging just fine.
Im getting this F21 Tz_HV_OverCurr_Fault every day, and it seems like a miscommunication between the inverter and the battery, i suspect the inverter is overcharging my batteries and the batteries shut down.
Anyone know what are the correct inverter settings for these batteries?
Do I need to contact deye or firmware upgrade or something?
I know its not an approved brand from deye.
Work mode: Zero export to CT
Energy pattern: Battery charge first
Batteries are connected to the inverter BMS port via provided ethernet cable.
During the day the batteries were charging and discharging just fine.
Im getting this F21 Tz_HV_OverCurr_Fault every day, and it seems like a miscommunication between the inverter and the battery, i suspect the inverter is overcharging my batteries and the batteries shut down.
Anyone know what are the correct inverter settings for these batteries?
Do I need to contact deye or firmware upgrade or something?
Attachments
Last edited:
