diy solar

diy solar

Blosted lifepo4cells

miran90

New Member
Joined
Dec 5, 2023
Messages
23
Location
Baghdad
Hello have anyone experienced bloated cells lifepo4....
 

Attachments

  • 20230705_175328.jpg
    20230705_175328.jpg
    1,021.8 KB · Views: 74
  • 20230705_175324.jpg
    20230705_175324.jpg
    643.7 KB · Views: 57
  • 20230705_190029.jpg
    20230705_190029.jpg
    656.7 KB · Views: 54
  • 20230705_190056.jpg
    20230705_190056.jpg
    1 MB · Views: 62
  • Screenshot_20230805_171226_Gallery.jpg
    Screenshot_20230805_171226_Gallery.jpg
    827.6 KB · Views: 70
  • Screenshot_20230717_122900_WhatsApp.jpg
    Screenshot_20230717_122900_WhatsApp.jpg
    254.9 KB · Views: 86
Woa, those like rept 280 cells, looks like the terminals sheered off from the expansion force. Who did you buy the cells from did you get a test report?
 
This package was not used heavily max voltage it had only 55.2 just for balancing its connected to other two packaged eve 105 that is now almost 3 years old this package was only 6 months old, I was surprised that when I starting to discharge them there is and issue with the capacity at 50% those 3 cells start to drop heavily. We replaced 3 cells then other 2 also were bad we had to cut the package to take them out that's why there was a strap..... the bms settings were conservative max discharge current for those cells was well under 0.25c temperature never exceeded 35c and total cycle number was under 50..
 

Attachments

  • Screenshot_20231106_133942_LiFePoQR Battery QR scanner.jpg
    Screenshot_20231106_133942_LiFePoQR Battery QR scanner.jpg
    109.6 KB · Views: 9
Woa, those like rept 280 cells, looks like the terminals sheered off from the expansion force. Who did you buy the cells from did you get a test report?
There Is a local assembler he replaced my cells under warranty now the battery contains as he assumed 14 300AH rept cells and 2 lishen 280AH..
 
What a helpful kitty!
Yes very helpful ?? there is one company at the US always promoting these Rept cells and they do capacity test for one cell not for a whole package ?, and they never go under 50% for high current test.
They keep promoting those and I advise against this new company only 4 years old... I am 70% sure that those cell that i did replace have factory defects or have sit in the storage for more than 8 months the local assembler never brought those cells again..
 
Yes very helpful ?? there is one company at the US always promoting these Rept cells and they do capacity test for one cell not for a whole package ?, and they never go under 50% for high current test.
They keep promoting those and I advise against this new company only 4 years old... I am 70% sure that those cell that i did replace have factory defects or have sit in the storage for more than 8 months the local assembler never brought those cells again..
I am sorry and sad that this happened to you. What is that low cell about? It isnt circled in the photo. 3.26- 3.0 is quite the spread! That could possibly be one at 10% and one at 60%.
 
I am sorry and sad that this happened to you. What is that low cell about? It isnt circled in the photo. 3.26- 3.0 is quite the spread! That could possibly be one at 10% and one at 60%.
The first 3 cells we replaced are obvious dead and their voltage show that, but I asked the company to bring additional cells to replace those 2 red circled since they also were different behavior and this voltage difference happens under 60% of capacity. Once we opened the package the other 2 bloated which are circled in red..those cells were very hard to balance at top they refuse to balance and I did balance them once I discharge then charge again the same issue they don't balance easily. I had to do many test to convince the assembler to replace them for me... for reference those eve 105 one of the best cells I've ever seen. Are connected parallel to this one.
 

Attachments

  • Screenshot_20230619_165457_BMS.jpg
    Screenshot_20230619_165457_BMS.jpg
    252.7 KB · Views: 8
  • Screenshot_20230619_172241_BMS.jpg
    Screenshot_20230619_172241_BMS.jpg
    253.9 KB · Views: 9
  • Screenshot_20230618_210256_BMS.jpg
    Screenshot_20230618_210256_BMS.jpg
    252.8 KB · Views: 8
  • Screenshot_20230620_043226_BMS.jpg
    Screenshot_20230620_043226_BMS.jpg
    151.4 KB · Views: 8
  • Screenshot_20230620_043450_BMS.jpg
    Screenshot_20230620_043450_BMS.jpg
    252.8 KB · Views: 8
  • Screenshot_20230624_175224_BMS.jpg
    Screenshot_20230624_175224_BMS.jpg
    254 KB · Views: 7
  • Screenshot_20230627_231635_BMS.jpg
    Screenshot_20230627_231635_BMS.jpg
    250.7 KB · Views: 7
  • Screenshot_20230627_012539_BMS.jpg
    Screenshot_20230627_012539_BMS.jpg
    261.8 KB · Views: 8
  • Screenshot_20230716_175749_BMS.jpg
    Screenshot_20230716_175749_BMS.jpg
    254.3 KB · Views: 8
  • Screenshot_20230716_200716_VBMS.jpg
    Screenshot_20230716_200716_VBMS.jpg
    140.8 KB · Views: 8
  • Screenshot_20230716_202948_BMS.jpg
    Screenshot_20230716_202948_BMS.jpg
    243.4 KB · Views: 5
  • Screenshot_20230716_201349_VBMS.jpg
    Screenshot_20230716_201349_VBMS.jpg
    140.9 KB · Views: 8
I would be pretty unhappy. I got mine at 18650batterystore.com and they are in fantastic shape. i think i remember .020 deviation at 3.1v when i tested last.
 
Yes very helpful ?? there is one company at the US always promoting these Rept cells and they do capacity test for one cell not for a whole package ?, and they never go under 50% for high current test.
They keep promoting those and I advise against this new company only 4 years old... I am 70% sure that those cell that i did replace have factory defects or have sit in the storage for more than 8 months the local assembler never brought those cells again..


I think you have very bad grade B cells, what company are you referring to?

You should watch this video:

see how they are sanding the qr code and replacing with fake qr code.
 
I think you have very bad grade B cells, what company are you referring to?

You should watch this video:

see how they are sanding the qr code and replacing with fake qr code.
I think all cells have the same sticker on top I bought those cells as legit grade A not used. And they are selling them as 300AH cells the package closed me 2600 USD which is not cheap. I should have gone with EVE 280k cells but he didn't have them at that time. Anyway these days eve 280k are shipped with 310 AH capacity there is a third generation cells out there
 

Attachments

  • IMG-20231112-WA0004.jpg
    IMG-20231112-WA0004.jpg
    202.1 KB · Views: 9
  • IMG-20231109-WA0026.jpg
    IMG-20231109-WA0026.jpg
    285.5 KB · Views: 9
I would assume they were abused.
I'm really curious what the deal is with the strap hold down and random sock...
View attachment 181476
The technician the assembly company sent tried to pull them out of the package with this strap I advised him not to do that and he stripped the terminal trying to. Then I used the cutter to cut the package bend the structure to take the cells out. He was surprised me too of how bloated those cells were... two more expanded after we opened the package. They sent me 280ah lishen cells to replace the last two and I did a video replacing them.
 
Take the bad cell and remove its top black label clean and see if you see signs of sanding and relabeling.
 

diy solar

diy solar
Back
Top