Search results

My Rv is only 25' & the roof space was very limited. I'm not sure the newer ones would fit in their place. But I have ample room on my 16' trailer I pull.

So this charger should work? I am thinking maybe I don't need two of the 400 watts & could get by fine with just one combined with my 325s?

They are full copper & about as thick as my thumb.

I don't know what Voc means & I pick the new panels on Monday so I can see then.

I'm adding two additional 400 watt panels. What size victron should I get? Thanks

Thank you. Just ordered one.

I'm addind two additional 400 watt panels next week. What size SCC would you recomend? Thanks again.

Is there a shunt you recommend?

Thank you. I felt the inverter was not working well as it would trip small loads. I have ordered a new Xantrex Freedom X 3000. I will be adding additional panels next week & I think I will also change out the charge controller soon. Thanks for the tips.

Yes, it is. I just ordered a Xantrex Freedom X 3000. I am picking up 2 more 400-watt panels on Monday. I have the current panels mounted flat & there is no more room on the Rigs roof for more, but I pull a 16' box trailer & will mount the additional panels on those & and tail them to the system...

They really never get above 13.20. I am going to add a couple more panels next week & see if that helps. The curet ones are mounted flat on the roof & very often, I only get 400 or so watts. I did order a new Xantrex Freedom X 3000 Truesine Inverter. The old one 3000 watts would get very hot &...

2010 Winne, 3 amps, Yes, it is disabled.

My Solar controller has a Bluetooth app I use that tells me how much solar is coming in & the state of the battery.

Thank you. I recently replaced the factory fridge & I even had the same issue when I would run the old one on propane. Aside from that my Inverter usually only shows about 200-300 watt draw. How or where do I do the professional BMS diagnostic? Thanks again.

On my RV, I have 2-325 watt 12-volt panels. A Renogy 40 amp solar controller. 800 AH lithium batteries. 2-300 AH & 1 200 AH. A 3000-watt Krieger inverter. I have the inverter connected to busbars & the batteries connected to the same bars. Very often, my system seems to drain very quickly, even...