Search results

Yes correct, i could only find the “smart lithium“ option in the drop down, there was no “standard lithium“ In terms of what i have done: it was to add to more PV panels which in turn then needed a more powerful MPPT and so i swapped the existing 100/50 to the new 150/45, cable for cable...

So should i leave this as is and see how things develop over the next days ? Sun looks good although we‘ll be driving (RV) and the B2B will kick in as soon as we start up in the morning. As I’ve sat all day starting with 100% on the Victron BMV and only seen that steadily deplete (now reading...

Here the battery settings:

Checked that, and all OK.

Yes it‘s lithium, 3 x 100ah (Victron)

On the Victron BMV 702 it shows the batteries at 80% and depleting and certainly not recharging. The load on it is small.

So after replacing my MMPT to a Victron 150/45 to replace my previous 100/50, this as I’d increased my panels, but having set everything up i get volts but now watts or amps ? So no charge going to my batteries it seems. Nice bright sunny day here in Copenhagen so thought it worth having the...

Thank you so much and thanks for the welcome 👍🏻 2 panels are Voc 25V and 2 are Voc 26V, seems i picked a bad or good day depending on how you look at it… Yes I’ll rewire back to the original set up and see what happens 🤞 I assume the Victron MPPT‘s are not fused 🤔

I have a 2 x 120w install on my RV, 4mm cables and wired to a Victron MPPT 100 / 50. I wanted to upgrade the system and learning that my limitation seemed to be the factory installed 6g (4mm) cables i realised that if adding any additional panels that i would need to do so in series (like the...