Search results

Well I swapped the BMS with a new one and had it working for about a year now. Drove the van today and went to turn the lights on and they immediately shut off. Now BMS says EEPROM Error again. Seams like a common occurrence with the DALY Brand

Hi, anyone else experiencing an EEPROM error on their Daly smart BMS? I had a 250amp version that showed an eeprom error right after we hooked it up. I have a 500amp version that has been installed for about 6 months and all of a sudden today shut off and now shows an eeprom error as well...

So I found a Daly BMS that can handle 500amps at 24volts. Anyone familiar with these or have any thoughts? Thanks,

I have: Dometic AC 1382 Watts Induction Cook Top (1) 1800 Watts Induction Cook Top (2) 1800 Watts Microwave 1500 Watts Misc Outlets 850 Watts Water Heater 1200 Watts Everything else is 24v or 12v.

No, the one I purchased is single phase 120VAC. Maybe I wrote down the wrong number when I posted.

I guess I could, I already have the inverter and other pieces. I am installing in a mobile application so it was much easier to use 24 Volts. I have a 26 volt Alternator I found and 12 Volt Solar Panels I was going to run in series/parallel.

Thanks for the reply and Info, So can I use the Contactor and connect the solenoid negative to the negative on the ANT BMS like Will did on his video so if the BMS shuts down it kills the contactor and releases? Or will the ANT not balance the cells if not being charged from it? I could...

Hey all!! I purchased: (16) 280 AH LiFePO4 packs that I am running series parallel to get 24volts. ANT 100A BMS with 300A Peak. AIMs 6000 Watt inverter (PICOGLF6024120ULC) with 120Volt Out and 120Volt 60Amp Charger. Victron 50 MPPT Solar Charger 800 Watts Of Renogy Solar Panels Simarine Pico...