Search results

Is there any charger / current regular I can use to charge a 12v, 100aH LFP battery from a car 12v socket without popping the fuse in the car? I think it's limited to 10amps, TIA!

Brand new LVX6048, have not reached the recomended torque value of 1.2 Nm & the terminal screw stripped, any advice? Thanks!

Which fuses would be recommended in between bus bar and an entire rack of 6x EG4-LL's? Using 2/0 copper, thanks!

3/4" NM/ SEU Cable connector will work on the LVX6048! Just need to rotate it 90 degrees so the flat edge will be on the longer oval side. (remove the stock plastic bushing)

is it possible to have a 2-phase system charge a shared battery rack?

Was looking for a more energy efficient alternative to the American Rotary AD40 https://www.americanrotary.com/products/view/ad-digital-smart-series/

@Zwy Thanks for that link, will check it out! It's a small milling machine. Label on it says the following: Current: 50amps Volts: 220V Hertz: 60 Phase: 3

Can split phase 240vac be used as an input for 3x of these units to output 208v 3-phase power? Trying to find an alternative to American Rotary Phase converter. Thanks! https://watts247.com/product/lv6548-6-5kw-120v-solar-inverter-4kw-250v-mppt-bms-ul1741-built-in-wifi/

1 Rack unit = 6x EG4-LL Parallel all-in-1 inverters= LVX6048WP Photo Credits: https://watts247.com & https://www.signaturesolar.us/

Good to know! Max parallel out at 6. Open to add more 6x rack units down the road

It's a bit alien, I'm just starting out. Appreciate your attention to details! My plan is to start out with 6x EG4-LL in the rack with 2x MPP LVX6048WP & expand to more in the future.

@smoothJoey nice find! This might be the ticket, appreciate you sharing!

Any thoughts on using Square D QO load centers for battery banks & All-in-1 inverters on breakers? https://www.se.com/us/en/faqs/FA95999/ https://www.se.com/us/en/faqs/FA95270/

Signed up for these units, https://watts247.com/product/lvx6048wp-should-be-here-late-fall-about-the-2k-range-add-yourself-to-the-watchlist/

I purchased 6x units & the rack

@smoothJoey yes plan is to have all of the inverters to batteries. @SignatureSolarUS Yes, I ordered the EG4 rack at Signature Solar. Not sure if it's necessary to use the busbars with these new EG4-LL units as they can be paralleled right on the unit itself

Appreciate if you can, thanks!

What is the best, clean, efficient way to distribute 48V DC power to multiple MPP inverters? Starting off with a 6x EG4-LL in the rack & possible more expansion in the future, thanks for any feedback! -Tony