Search results

In a 50 amp split phase Victron Multiplus II setup, I would like to use only one leg of the AC out 2. On the Multiplus AC Out 2 connection point, I will only connect wiring to L1 and Neutral and earth, and will not connect wire to L2. Sorry for what is probably silly question - is this the...

I'm considering a Victron Multiplus II 2x120 for a 45 foot boat environment, but wondering if the fan / other noises from the unit would be too much for the small space? I've seen some reports of relatively high noise from this unit, and wondering if anyone has some real-world experiences...

Hi everyone, I've got a 150amp battery isolator with one input, and three outputs. A 125a alternator (w/ standard/non-upgraded regulator) is connected to the isolator input. The first output goes to an AGM battery bank, the second output goes to a separate AGM battery bank, and the third...

After studying lots of info on parallel wiring and best balancing, my main takeaways are: - use large gauge wire - try to keep battery connection cabling to similar lengths to support best balancing - Exact lengths not super critical With this in mind, I've come up with the following wiring...

I've spent many hours learning and scouring this great forum and the web, but still puzzling over best setup for my sailboat solar/LFP upgrade i'm planning early spring: Here's is a list of my planned equipment - all 12v: - Single diesel engine, 125A 'dumb' alternator - 1 110A AGM starter...