Search results

Today I fitted a second jk identical to the first and used a 300 a solenoid to turn on and off the battery - side of the bus Only with these inline the bus refuses to start or keep going once the solenoid is removed it is fine the first has run for 3 months now with no problems And yes the...

These products work fine together use a 63 a 2 pole circuit breaker on the incoming pv + and - of at least 100vdc And a 200 a fuse on the battery incoming or suitable CB wire panel with solar grade cable of 4 mm2 and use 16 mm2 on the battery cablesa mt 50 is easier to read but not necessary as...

Mine uses 1.5a @ 24v nice water though

Do not go lower in voltage go up if anything I know from experience of a CB that went on fire

Do not mount fuse on the battery it is a fire risk as it can melt down and cause a much larger battery fire

Check you have the Bluetooth dongle fitted

Take a look at the aftermarket apps for jbd especially carplounge BMS links are on this forum I installed one today it is very good and allows adjustment