Search results

Im no expert but when your using something it will show a much lower voltage then when at idle the best way is to wait a few min. with NO load then check the batteries at their post with multimeter

sounds like what I did , only different is im running 24 volt inverter , with 4 12v 100ah sok batteries

Thats what I did . tree is dead ...Dead ..... DEAD !!!!

Im NO expert , but are they both the ,Included solar charge controller and the MPPT, set to charging to the same voltage level ?

yes , My own cable plugs on both ends . very stupid . had a brain fart. but it is in the past now , an expensive teacher. thats why I want to get it repaired .

Well , I guess so , why the hell not . I plugged grid power into the bluetti . OK , now you can tell me how STUPID I am . it was last year and im still Kicking myself.

Does anybody know where I can get my ac200p fixed, I fried the inverter . the 12 volt stuff works (never use it) the charging works , everything works except for turning the inverter on then it gives me error that the inverter will not work. its NOT under warrantee cuz I did a stupid thing and...

I started with 4 100 watt panels , but just wanted to make sure I can get some energy when I get NO sun for 5 days in a row. im 300 feet deep cuz I am 1/2 way up a mountain side. I needed a split phase inverter cuz the pump is 240 volt. if it was 120 volt, the inverter would have been very...

I don't know if this helps , I have a well pump I run 24/7 on solar , 300 foot down in the hole. I have 6 100 watt solar panels ( 140 foot run from panels to charge controller) $ 100.00 each 1 epever 60 amp solar charge controller 150 max input voltage ( this is more then what I needed ) $...

The only reason I got a 4kw inverter was that was the lowest of what they offered in split phase 24 volts. I use it for when power goes out ( not that often ) but decided to use it all the time for my well pump 1.5 hp and sometimes if its sunny out I run my fridge during the day. so 20 amp for...

yes its a 60 amp not watt , OCP for every wire ? that would be 10+ OCP , is that right ? for the 6 awg wire for the scc , it is the biggest I can put on their. I typed the wrong number ... didnt see it until I posted it . its 2 (two) awg NOT 4 for the inverter to the bus bar , one foot long.

I have set up epever 60 watt cc (mppt) , 6 100w rich solar panels 3s2p , 140 foot run from panels to cc 10 awg. Charge controller , batteries and inverter on same busbar. aims 4000w split phase inverter , 4 sok 12v 100 amp batteries 2s2p , 24 volt system. using 2 awg from batteries to bus bar...