Search results

It's a bit of a ramble but I read through your posts and was following up really quick before a meeting at work, the full deets: I have a SOK 100AH and 206AH (Both Heated/BT) versions, in parallel, yeah I know not a great idea mixing but they're pretty close in resistance to the point where...

I know this is an old thread, JAS, I worked with Ian about SolarAssistant not working correctly, he sent me some hardware. Didn't change anything, very nice about support. Despite this, I do not recommend buying from Watts247 after my experience as the products are not well tested. I brought...

I would expect replacement units at this point

You're reading all this information through solar Assistant- I have mpp solar lv1012, nothing fancy just 306whr batteries (sok) no comms other than Bluetooth. What I have learned from I having solar Assistant since 7/1/22 is that the information may be off based on what it reads from your...

^ 100% what I would do, if the first run with them together didn't yield results (shouldn't be a problem since they're in parallel and same capacity, should be hitting 100% roughly simultaneously); would want to keep my eye out to see how the cells behave after a couple cycles. I do know SOK...

Just seeing this, may be too late, if not I mean honestly, just see the differential between the battery state (Voltage) and the charge controller, assume that the charge controller is going to be off and set voltage target to be higher if you want the SOC to go 'further' before cutting itself...

Yeah I got a pretty decent response from someone who actually I've seen post on this forum. I'll post at the end of thread. Pretty reasonable, I appreciate your suggestion on ensuring quality performance, I actually can test 2 other identical panels of very close age so I'm going to likely do...

Hello there all, I purchased a 240W Newpowa solar panel and noticed some odd discoloration as well as what seems to be at least for me a manufacturing defect. Since there are people here who have a lot of familiarity with a lot of panels, common issues and wear and tear experience I wanted to...

I noticed this I see that it's a USB b connector and that the other connectors are RJ45 or rs232 so it's apparent that they are not compatible as a USB b connector is not an RJ45 or RS 232 connector however it seems that there are adapters that make it possible to turn a usb-b connector into an...

Did you try the circuit breaker button? If not this might be something for warranty claim