Search results

I didn't try watchpower after the flash attempt. My main goal is rolling the inverter back as the ranch is down from three inverters to two. The issue with this location is that the residents are dependent on these inverters for power, there is not grid. Because of this I didn't try and update...

The inverter had been off and was in a room that was 45 degrees f* (7c). The display was cool to the touch. Thank you for your input.

Drove up to the ranch yesterday to update the firmware to hopefully resolve the intermittent resets. I followed the procedure as documented including assuring the solar input was off any all parallel inverters were off. I used the following most up to date firmware...

The ranch running the paralleled 3x LVX6048 have reported no resets in the last 10 days. Apparently the weather has been "much cooler" up at the ranch. No changes have been made. Looking forward to a solution from Ian @watts247.

Odd considering as I understand that those are different manufactures. Does anyone have ideas on what is causing these seemingly random resets? The ranch owners are extremely happy will all their newfound power but the random resets are confidence shaking. No errors on the units.

Greetings everyone, I built a system with 40kWh of batteries and three LVX6048 inverters powering an off-grid ranch and I have a curious issue. Beyond this issue the system is fantastic. Every few nights, the power blips off and on for a few seconds. It is not every night but it only occurs at...