Search results

Hehehehe, good one :) No walmart in Romania, but I will borrow a battery while waiting for my cells to arrive from China, hopefully this year. Meanwhile, I tested my theory by plugging in an electric heater and I managed to see the power meter rotate the other way around.

Indeed, the value 2 is right, the description was wrong, it is SBU.

The settings are indeed configured correctly. The system priority is 2 (BUS) and the timer for output source priority is also configure correctly. It is however, as I figured out, like this: if I pull over 8-1000W from the system, then the inverter will deliver from the panels, provided that...

The issue that I personally had with the usb comming from my MPP Solar PIP 11kW inverter is that in Linux the usb port is not recognized as a usb to serial converter and instead it is loaded as a HID device, both on a linux laptop and two RPis (3B and 4 models). The shortest solution that I...

Thank you for your kind reply! I have no BMS installed and no batteries :-( My expectations would be to pull most from the prioritized source, which is the PV system. I triple/more than 10 time checked all available configurations, both in the LCD panel and by sending command directly to the...

Hello everyone! I have a newly installed PIP MAX 11kW MPPT connected to the grid with no batteries yet. I configured it to have the solar as first output priority, checked the value and it seems ok. I also have the timer for the output source priority configured correctly to deliver from 0 to 23...