Search results

I have a Aimpinvt 80A solar charge controller. Yes, 2,200w

Hey guys, I have an eco-worthy dual axis solar tracker with 6 (200) w panels attached to it. I also have 10 (100) w panels on my shed that are hooked up to it. My question is I only have 17+\- v. 50 +\- amps and 600-700watts. Shouldn’t I be making a lot more power than that? They are all wired...

Hello, the Chinese inverters make their power that way , it’s just normal, it’s not up to code and will not pass inspection. If you connect the two together you will burn out the inverter. You may want to check out Victron, I know their expensive but it might be worth a try?

Also, I found out why I have 65v on one leg and 55v on the other leg at the inverter…120v… that is normal for chineses inverters, that’s just the way they make power. It is NOT up to code and will give you an open ground reading at your loads.

Hey jtown, I talked to John @ the inverter service center. I think they are in TenNessie , any way he said if you combine the neutral and the ground you will burn up you inverter!

I do not know about that my friend? Sorry

Hello, I have the same problem with my mxmoonfree 6000w inverter. When the line for the loads is connected to grid power all my outlets have grounds. But as soon as I hook it up to my inverter, no grounds.Also the outlets on the inverter itself have no grounds? this is my second inverter with...

I have an[8] string run of 110v 15a wall sockets wired in series. I recently bought an mxmoonfree inverter and when I switched it over all my sockets lost there grounds. Now if I hook up. The power to an extension cord from the house to the line that hooks up to the inverter, all my grounds are...

hey guys, I’m having this strange problem where the 15 amp factory Fuse for my solar string is connected Keeps blowing In the combiner box? Ive got 1,000 watts on the roof and they are wired in parallel. Voc is . . 20.1 amps are below 50. I just got an Impvint 80 amp charge controller and that’s...

I just perchased an Aims 80 amp controller/ 4 stage charger. The second I powered it up, and I triple checked the manual, the red alarm light came on and it does not charge?