Checking the DEYE sun-8k-sg01lp1-eu manual I am unsure about how to configure the inverter to work on the following mode.
- Primary power source: PV. It will be used to power the loads and charge the battery. Any excess production will be sold to the grid.
- Secondary power source: Battery. When PV is not enough, the system will use power stored in the batteries
- Backup power source: Grid. Use only to power the loads when PV and battery cannot provide enough power. Never use it to charge the battery.
Is it possible to configure this inverter in this mode? By looking at the page 30 of the manual, it seems confusing to me if it is possible. Manual attached. Thanks
- Primary power source: PV. It will be used to power the loads and charge the battery. Any excess production will be sold to the grid.
- Secondary power source: Battery. When PV is not enough, the system will use power stored in the batteries
- Backup power source: Grid. Use only to power the loads when PV and battery cannot provide enough power. Never use it to charge the battery.
Is it possible to configure this inverter in this mode? By looking at the page 30 of the manual, it seems confusing to me if it is possible. Manual attached. Thanks