Schneider Insight Home and WattNode

[kram]

I have seen some posts mentioning the WattNode meter for Schneider, question for someone using both a WattNode meter and a EG4 Communication Hub.

How does one connect both devices through the same MODBUS port on Insight Home?

WattNode needs Port : 7, 11 and 9
EG4 Communication Hub needs Port : 7 and 8

 

[400bird]

This is an older post, if you're still looking for answers @n2aws might have a WattNode and EG4 batteries.

 

[n2aws]

I do happen to have a wattnode and EG4 batteries.

A slight clarification, you'll want pins 9 and 11 for both, since they both speak RS485.
The wattnode also has the pin 7, but I never actually needed/used it.

As for the "how", I used 3 port wago connectors.. but wirenuts or other similar options would work.

On the A side, I had a wire from the wattnode, a wire from the battery, and a wire from to the insight home. same with the B side.