Bluewatersailor
New Member
- Joined
- Nov 18, 2020
- Messages
- 58
Totally novice so please be kind with your reply
I am buying 8x 200ah Calbs cells, it seen the best way to top balance them is first wired them in parallel and give them a full charge.
Is it better to do this as two banks of 12v200ah or one bank 12v400ah ?
My shore charger is Centaur Charger 12/40 , by using AGM setting will this be ok ?
As I keep reading lithium don't like being on Float At what point do I remove it from charge . When the Amos drop to 1A/ 0A ?
And is this best done with the BMS connection or not ?
Once there been charger and reconfigure them to serial and charge 3.4/3.5v/3.6v until the Amps full to 0A
As this is possible a one off plus we don't really have room to carry more chargers on board what reasonable price charge is recommended ?
The small lithium chargers seen to only have one setting 3.6v , I guess using one of them will take a long time .
Thank guys
I am buying 8x 200ah Calbs cells, it seen the best way to top balance them is first wired them in parallel and give them a full charge.
Is it better to do this as two banks of 12v200ah or one bank 12v400ah ?
My shore charger is Centaur Charger 12/40 , by using AGM setting will this be ok ?
As I keep reading lithium don't like being on Float At what point do I remove it from charge . When the Amos drop to 1A/ 0A ?
And is this best done with the BMS connection or not ?
Once there been charger and reconfigure them to serial and charge 3.4/3.5v/3.6v until the Amps full to 0A
As this is possible a one off plus we don't really have room to carry more chargers on board what reasonable price charge is recommended ?
The small lithium chargers seen to only have one setting 3.6v , I guess using one of them will take a long time .
Thank guys