Victron wire for ac out

[koolcatjoe40]

I have a Aims 24v/ 3000 watt inverter. I have a Victron multiplus II on the way. I am using solid copper wire right now. Can I use solid wire for the Victron or do I need straned . All the videos show straned. I know you have to use a ferrule on the end of the straned wire before putting it into the ac out slot.

 

[DIYrich]

Either is fine. Stranded is for large wire because it is hard to bend that big solid wire. Stranded is hard enough.

 

[koolcatjoe40]

Either is fine. Stranded is for large wire because it is hard to bend that big solid wire. Stranded is hard enough.

I have 2 of the mutliplus II plus coming so I can do split phase soon. I will have to pull wire for for the second one. I have lots of 10/2 romex so I plan on using that.

 

[Q-Dog]

Double check the manual but I think minimum wire gauge for the Multiplus 2 120v 3000 is 6 AWG for AC out1.