apctjb

Note on the SRNE HESP (12KW) terminals are marked CU conductors only.

#6 Copper, THHN THWN

I confirmed with Borick - SRNE had received my purchase I was given this SRNE Technical link after words. Not seen it posted before...

Its been a couple years since I last bought EVE cells. Any recommendations on supplier with US stock that provides good quality EVE 280??

@Badbyte; Is this the one you are using? Any problems getting it to communicate with SRNE Inverters? I have both the HESP and ASP

No problem building my own other than having too many projects, too little time but thinking that may be the best solution. I will check...

That would work! But a single battery is simple and less expensive...

For the HESP 12KW I just installed I am thinking of a single 280AH/ 15KwHr battery. Its a grid connected system so I really don't need...

Opinion time. Option 1 - Run the battery cables down through the gutter where the red bushings are. Option 2 - run them along the AC...

That's my understanding. Could be done with a Transfer switch and some means to disconnect from mains. More straightforward is connect...

Keeping the existing grid tie inverter and simply adding the HESP hybrid as a second inverter . Both back feed to grid, but only the...

Different systems. With HESP I am adding additional PV & battery backup to an existing on grid system. ASP is for a separate off grid...

Received the SRNE ASP 10KW split phase inverter today. Similar box and packaging as the HESP 12KW I previously ordered. Box was...

HESP48120U20 -H Only been operating a little over a week and running without battery as on grid inverter. That said so far so good.

I am running HESP without battery as on grid inverter and can confirm that the load terminals (they call it UPS load) are energized all...

30 Aptos 375W; 3 parallel strings of 10 in series.

Only been operating a week so early days. So far I am impressed. Very good build quality and screens and menus are logical and easy to...

Got the SRNE HESP (12kw) installed with a new 11.1KW Aptos bifacial array (those modules are beautiful). Have not decided on which...