Vaseline for me, never had a bad connection or corrosion occur.
If you are that worried about a minuscule amount of connection loses, upsize the connectors maybe or the bolt sizes to clamp more?
I can understand heatsinks requiring thermal paste, as generally they are not clamped on with high...
That is one way, but generally export only occurs( and thus diverted power in that scenario) if battery near 100%, which is not ideal and as standard as I said it got into a loop of sensing export then diverting power, then MP would sense more power required until both flat out.
Plus when near...
I have Victron MP 2 GX AC2 supplying small DB ( AC2 on /off at given voltage ) this supplies socket running convector heater directly and immersion heater on a contactor switched by aux relay from MP2 on/ off at slightly higher voltage than AC2. Then in summer the socket running convector heater...
Each battery in a multi battery set up should have equal lengths of cabling, a single battery set up cabling can have different length of positive / negative cables. But then if you add another battery you should ensure the cable lengths/ size is equal to the new battery as the original.
This is...
Strange supplier to name, I recently purchased 6 x Longi 425w panels & mounting rails from city plumbing - branches nationwide in UK - website with ordering/ prices.
They where the cheapest I could find incl delivery.
With excellent after sales - 1no. Of the panels had a slight mark on...
Personally if your house is being built and you can afford it, put on 8kw and larger battery.
If budget constraints are an issue put on 4kw and smaller battery( most battery banks can be upsized later on), but ensure all the bits and pieces are there for later upsizing.
No Air Con in your kWh...
System voltage is 60v, aliexpress dc isolator was advertised as 60V !!!, but as usual take any spec from China with pinch of salt.
And yes I know bluesea spec is max 48v, I'm looking at alternatives(recomendations welcome).
Voltage will exceed spec - no excuses - but amperage/ wattage is well...