Vigo

My basic understanding of this is that anything that PWMs to control ‘average’ current actually flows far more during its ‘on pulses’...

It's a speed-of-damage thing. The fuse has to overheat and melt to open, while the electronics can just break down and short out and...

Exactly. In principle, the input of the MPPT presents a load resistance between zero and infinite Ohms to maximize the power from the...

I think we are at the point now! Its not an ,,accident,, I'm asking this. I built everything very carefully. I have multiple layers of...

I have a 600w array on a Victron mppt 100/30, (clips above 440w), it does work in that range, but it also tends to cause some issues...

I really hope you don't see me as a defender of the system, I was merely pointing out that I would call it a 48V system. In my system...

I added an edit after the text, I dont understand why you discussed something totally different then the load case here, but I saw that...

Exactly. The BMSs are the issue. IF you could somehow connect all of the BMSs together so they talk to each other and work as one...

Yup Looks like about 20 equalizers should take care of it. lol

Yeah I didn't really understand that. I was hoping people would talk about me and say "Wow, that dude Kolek has some big brass nuts!"...

I will not install anything that doesn’t have at least a five year track record, and positive feedback from other contractors/service...

What does your History tab show?

In my experience, it takes a few cycles to get the SOC calibrated.

They have caveats on this. The published limit is for PV reverse polarity protection as that's the max current the contactor can...

https://diysolarforum.com/threads/voltage-limiter-between-panel-and-controller-for-occasional-voltage-spike.34714/...

It arrived, today. It appears that it was dropped on the top right corner. Mounting flange is bent on the corner. But I don't see any...

Should work because even if there is serious voltage drop going on it shouldn't pull more than ~16-18 amps on that circuit. The 7 pin...

I have used hammer crimpers but they are highly susceptible to technique and NEVER as good as something that crimps from all sides. I...

This makes me happy.

Update: Just completed first charge after correcting some connectors/wires/breakers etc who was loose hot etc. Heat is gone and...