-
-
VVigo reacted to tinyt's post in the thread Cheap amazon breakers everyone thought were a fire hazard? with
Like.
The problem I found with this type of breakers is that the metal bolt flanges are lower than the plastic they or molded in. So in the... -
VVigo reacted to fatjay's post in the thread Cheap amazon breakers everyone thought were a fire hazard? with Like.
Turns out, they're not so bad. After tripping one under load of about 100a when it was supposed to be rated for 150a, I replaced it...
-
VVigo reacted to Sun Snatcher's post in the thread DC House 12.8V 165 Ah Metal Case Battery Test & added 2KW Inverter with Like.
Papajunk opened one up and capacity test:
-
VVigo reacted to BarracudaBob's post in the thread DC House 12.8V 165 Ah Metal Case Battery Test & added 2KW Inverter with Like.
I just did a capacity test on a DC House 12.8V 165Ah with Bluetooth I bought in December on sale. I connected a Harbor Freight 2K...
-
VVigo reacted to timselectric's post in the thread Verticals STILL the best producers (especially when it counts) with Like.
It's going to be a custom fabrication, on my part.
-
VVigo reacted to Madcodger's post in the thread Verticals STILL the best producers (especially when it counts) with Like.
I just took a peak at my solar production and noticed that even 58 days after winter solstice (32 days until spring equinox), at...
-
VI just ordered one unit without any issue. I was working with Helen, total cost was $225 delivered
-
VI was going to make a new post with more details when I have time, but so far so good. It was cranking out 105A earlier today.
-
VVigo reacted to JoeHam's post in the thread WEIZE 12V 100Ah Lifepo4, Buy any Two for 179.99 with Like.
You have to tick the redeem box for “savings” but it looks like 100Ah is finally under $100 each if you buy two.
-
VCheapest I’ve seen - this is eBay today. I have four of these and super unscientifically they test at 100%. Not Bluetooth tho.
-
VVigo replied to the thread AC input issues with solar power system.There are probably multiple connections in the same ambient conditions there and probably only one of them got seriously corroded...
-
VIt should have CU/AL printed on the lug if it is copper and aluminum compatible.
-
VHey all, I had an incident occur with my solar setup and thought I'd share my experience. A couple weeks ago, I had my EG4 6500EX on...
-
VMaybe try to determine which cells went bad and take the good ones and then reconfigure those into one or two usable packs with a proper...
-
VI’ve got other projects in the pipeline that require the use of an adjustable power supply so it was easy to justify the expense...
-
VWell, now I’m pretty convinced that the BMSs are trash, and more than likely the cells are permanently damaged. I had been slowly...
-
Vpost 39. Search: this thread, jbd. Less than a minute...😊
-
VDid you charge each of the 25p "cell" to 3.50v in bat #1 as mentioned? The #1 pack is better. You were > 300mV delta at > 13.80V...
-
VI'm about to receive this one: https://www.alibaba.com/product-detail/SUYEEGO-Max-PV-500v-48v-120A_1601184114571.html I'll post...
-
VIs 2awg wire sufficient to handle the maximum current your bank will sustain?
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…